IPC100

The IPC100 is an easy to use, plug and play evaluation kit for evaluating the IPC1 Clock Synchronization Module, the IPC2713 Sync over Packet Engine (SoPE) for IEEE1588, and the PC2723 Sync over Packet Engine (SoPE) for CES. The IPC100 is using the both the design of the IPC1 clock synchronization module as well as the Sync over Packet Engine (SoPE) design. Having the three products designs integrated into a single box, the IPC100 can be used for evaluating the IPC1, the IPC2713 and the IPC2723. The IPC100 was built for quick and easy setup phase by limiting the number of parameters for configuration to the minimum possible. Simply power up the IPC100 and configure it to be either Master or Slave and the number of packets per second it should transmit (or receive) and the it is ready to go. No further tuning is required to achieve excellent clock synchronization performance.

Operates either as Master or Slave
Supports both 1588 and CES packets clock synchronization
Sync Packet Interfaces

10/100 Base-T
RJ-45 Connector

Clock ports

Dual Clock out
Clock in (Rear panel)
SMA Connector

Sync Status LEDs

Lock (LK)
Hold-Over (HO)
Free-Run (FR)

General Status LEDs

STAT
PWR/MOD

Management

Local via RS232
Remote via Telnet (using the FE Mgmt port)